Just finished last storage issue (4×8 sheets of plywood) and we actually test fit both vehicles in garage. A little tight but not too bad.
Here is simple plywood vertical storage solution I came up with. When setting the old desk/shelf height I purposely gave clearance below just for this.
Plywood Storage
I moved the temp working surface to this side of garage as Lisa prefers to park on left for now. Once it gets cold here (Nov/Dec) this gets broken down so both vehicles can be inside – it really sucks to scrape 12 inches of snow and ice off windshield +…
Temp Working Table – at least until winter
This is a nice view of where boat will be set-up for building – wintertime, truck goes here. If you look closely, you can see 4 sheets of plywood to the right of my workbench – very effective storage solution. Overall, I think the shop came out nicely – everything on mobile bases provides a good amount of flexibility when working – Can’t wait to see the boat building jig set-up in here…not till after winter as need good temps for epoxy to fully cure.
Boat will be set up on left side of garage
Here is what the workshop looked like while I was doing the house renovations – it was pretty nice, but layout wouldn’t work building a boat and it was impossible to park vehicles inside…
Old Shop – Summer Configuration